Routing smaller items on a router table can be dangerous. A commercial shop would use a feed roller, but in a home shop feather-boards can work just as well. Most woodworkers simply cut them out as needed from scrap, but they do sell commercial versions. If you have a 3D printer, you can make some great ones using simple T track hardware. There are many versions on thingaverse, but I wanted to design one that worked as a system.
The video shows designing, printing, assembling and using the 3D printed Feather-Board system as well as the hardware needed.
The files included are (with quantity needed):
- HorizontalFence-Featherx4.stl
- VerticalFence-FeatherBar2x.stl
- VerticalFence-MountBar2x.stl
- VerticalFence-Feather2x.stl
- VerticalFence-LeftMount1x.stl
- VerticalFence-RightMount1x.stl